Cleaning
up: Nano 'towel' soaks up oil spills
PARIS
Petroleumworld.com, June 02, 2008
Researchers in the United States announced Friday
they had created a paper-like membrane made of nano-scale materials that could
clean up oil pollution and other chemical spills.
The substance can absorb up to 20 times its own weight in oil and be recycled
again and again for future use, while the oil itself can also be recovered and
used, they reported in the specialist journal Nature Nanotechnology.
The novel material comprises wires made of potassium manganese oxide at the scale
of 20 nanometres, or 20 billionths of a metre, in diameter.
Together, the wires form a "spaghetti-like mat" whose strands have
tiny pores that are good at absorbing liquids.
The membrane is covered with a hydrophobic, or water-repelling, coating. As a
result, water cannot penetrate the membrane -- but oil can.
"What we have found is that we can make 'paper' from an interwoven mesh
of nanowires that is able to selectively absorb hydrophobic liquids from water," said
lead researcher Francesco Stellacci, an associate professor of materials science
at the Massachusetts Institute of Technology (MIT).
The membrane appears to be completely impervious to water, he said.
"Our material can be left in water a month or two, and when you take it
out, it's still dry. But at the same time, if that water contains some hydrophobic
contaminants, they will get absorbed."
This also opens the way for using the membrane as a water filter, the team said.
Oil that is snared by the membrane can be removed by heating above the boiling
point of oil. The oil evaporates and can be condensed back into a liquid.
In a press release, MIT said the membrane can be fabricated more cheaply than
other nano materials. In the same way that cellulose is used for making conventional
paper, a suspension is dried on a non-sticking plate.
In a commentary, published in the same journal, University of Michigan chemical
engineer Joerg Lahann questioned whether the membrane would be used commercially,
given the cost -- and possible toxicity -- of manganese oxide.
"Even so, it clearly provides a blueprint that can guide the design of future
nanomaterials for environmental applications," Lahann said. "Many other
examples are expected to follow and will confirm the potential of nanomaterials
for protecting the environment."
On May 5, French-led technologists said they had beefed up the performance of
a nano-powder that stores carbon dioxide (CO2), in a step towards creating a
a filter to catch greenhouse gases from vehicle exhausts.
A cubic metre (35 cubic feet) of the new substance, called MIL-101, is able to
capture 400 cu. metres (14,125 cu. feet) of CO2, thanks to pores 3.5 nanometres
(billionths of a metre) across, according to the National Centre for Scientific
Research (CNRS).
Story
from AFP
AFP 30 1040 GMT 05 08
Copyright© 2008
respective author or news agency.
All rights reserved.
We welcome
the use of Petroleumworld™ stories
by anyone provided it mentions Petroleumworld.com as the source.
Other stories you have to get authorization by its authors.
Send
this story to a friend
Your
feedback is important to us!
We invite all our readers to share with us
their views and comments about this article.
Write
to editor@petroleumworld.com
Any
question or suggestions, please write to:
editor@petroleumworld.com
Best
Viewed with IE
5.01+
Windows
NT 4.0, '95, '98 and ME +/ 800x600 pixels